MET Radar Modules

• 

  Ka-band Down-converter

  It has the function of down-conversion from Ka band to L/S band. The RF input port also has the function of feeding, reference input, and clock input. The module starts to work automatically after power-on

• 

  Ka-band Up-converter

  It has the function of up-conversion from L/S band to Ka band. The RF input port also has the function of feeding, reference input, and clock input. The module starts to work automatically after power-on.

• 

  C-band Variable-Frequency Drive

  C-band variable-frequency drive is used to convert 1200MHz intermediate frequency signal upto 4GHz ~ 8GHz RF signal, and then transmit the same after wave filtering and power amplification.

• 

  Broadband TR Module

  1)The received signal is processed by high-power TR switch, amplitude limiting, filtering amplification and mixed for IF output. It can be configured with different receiving bandwidths;2)Supportive transmitting and receiving of common communication signals: SSB, AM, FM, ASK, PSK, FSK, 16QAM, OFDM and so on.

• 

  Ku/Ka Dual Frequency PA

  Indicator Requirements:1)Output Operating Frequency Range: 29GHz～31GHz（Ka）;13.75GHz～14.5GHz（Ku）；2)LO Frequency: 27GHz（Ka）；11.5GHz（Ku）；3)IF Input Frequency Range: 2GHz～4GHz（Ka）； 2.25GHz～3GHz（Ku）；4)Operating Mode: Continuous wave

• 

  Broadband PA

  Indicator Requirements:1）Operating Frequency: 6～18GHz;2）Output Power: ≥100W continuous wave;3）Power Flatness: ≤±2dB；4）Gain: ≥30dB；

• 

  X-band PA Module

  Indicator Requirements:1）Operating Frequency: 7200MHz～7300MHz；2）Input Power: -10dBm；3）Rated Output Power: ≥100W(50dBm)；4）Gain: ≥60dBc；

• 

  P-band PA Module

  Indicator Requirements:1) Operating Bandwidth: 170～600MHz；2) PA Operating Mode: AB type；3) Applicable Communication Signal Type: Digital modulation（FSK、QPSK）；4) Input Signal Level: +5dBm；